toyota tundra II bolt pattern & wheel specs
The toyota Tundra II (2007–2016) has a 5x150 bolt pattern, M14x1.5 lug thread, and 110.0 mm center bore.
toyota tundra II wheel bolt pattern & specs
| Bolt pattern (PCD) | 5x150 |
|---|---|
| Wheel thread / lug size | M14x1.5 |
| Center bore | 110.0 mm |
| Generation years | 2007–2016 |
| Source | bolt-pattern.com |
What else uses this bolt pattern?
The toyota Tundra II's 5x150 bolt pattern is shared by other vehicles; wheels and adapters made for one may physically bolt to another (center bore and load rating permitting).
More wheel specs
Frequently asked questions
What is the bolt pattern of a toyota Tundra II?
The toyota Tundra II has a 5x150 bolt pattern with a 110.0 mm center bore. Bolt pattern is consistent across the model generation; confirm against your existing wheel before fitting aftermarket wheels or adapters.
What size lug nuts does the toyota Tundra II use?
The toyota Tundra II uses M14x1.5 wheel studs / lug thread. Match this thread size and pitch exactly when replacing lug nuts; an incorrect pitch will cross-thread and fail to torque properly.
What is the center bore of a toyota Tundra II?
The toyota Tundra II has a 110.0 mm center bore. Aftermarket wheels with a larger bore need hub-centric rings to sit true; a smaller bore will not fit over the hub.
Last verified 2026-10-07. Bolt-pattern data is generation-level community reference; confirm against your vehicle's wheel before purchase.