Tirefolio Find my fitment

toyota TACOMA 4WD & 2WD PRE-RUNNER bolt pattern & wheel specs

The toyota TACOMA 4WD & 2WD PRE-RUNNER (1995–2004) has a 6x139.7 bolt pattern, M12x1.5 lug thread, and 106.0 mm center bore.

toyota TACOMA 4WD & 2WD PRE-RUNNER wheel bolt pattern & specs

Bolt pattern (PCD)6x139.7
Wheel thread / lug sizeM12x1.5
Center bore106.0 mm
Generation years1995–2004
Sourceadaptitusa-reference

The toyota TACOMA 4WD & 2WD PRE-RUNNER uses a 6x139.7 bolt pattern, M12x1.5 lug thread, and a 106.0 mm center bore. Bolt pattern and hub specs are stable across a model generation — always confirm against your vehicle's existing wheel before buying aftermarket wheels, spacers, or adapters. Source: community wheel-fitment reference data.

What else uses this bolt pattern?

The toyota TACOMA 4WD & 2WD PRE-RUNNER's 6x139.7 bolt pattern is shared by other vehicles — wheels and adapters made for one may physically bolt to another (center bore and load rating permitting). See the full list on the 6x139.7 bolt pattern page.

Frequently asked questions

What is the bolt pattern of a toyota TACOMA 4WD & 2WD PRE-RUNNER?
The toyota TACOMA 4WD & 2WD PRE-RUNNER has a 6x139.7 bolt pattern with a 106.0 mm center bore. Bolt pattern is consistent across the model generation — confirm against your existing wheel before fitting aftermarket wheels or adapters.
What size lug nuts does the toyota TACOMA 4WD & 2WD PRE-RUNNER use?
The toyota TACOMA 4WD & 2WD PRE-RUNNER uses M12x1.5 wheel studs / lug thread. Match this thread size and pitch exactly when replacing lug nuts — an incorrect pitch will cross-thread and fail to torque properly.
What is the center bore of a toyota TACOMA 4WD & 2WD PRE-RUNNER?
The toyota TACOMA 4WD & 2WD PRE-RUNNER has a 106.0 mm center bore. Aftermarket wheels with a larger bore need hub-centric rings to sit true; a smaller bore will not fit over the hub.

Last verified 2026-07-07. Bolt-pattern data is generation-level community reference — confirm against your vehicle's wheel before purchase.