ford Tourneo Connect bolt pattern & wheel specs
The ford Tourneo Connect (2013–2017) has a 5x108 bolt pattern, M12x1.5 lug thread, and 63.4 mm center bore.
See tire sizes & fitment for the ford Tourneo Connect →
ford Tourneo Connect wheel bolt pattern & specs
| Bolt pattern (PCD) | 5x108 |
|---|---|
| Wheel thread / lug size | M12x1.5 |
| Center bore | 63.4 mm |
| Generation years | 2013–2017 |
| Source | bolt-pattern.com |
What else uses this bolt pattern?
The ford Tourneo Connect's 5x108 bolt pattern is shared by other vehicles — wheels and adapters made for one may physically bolt to another (center bore and load rating permitting). See the full list on the 5x108 bolt pattern page.
Frequently asked questions
What is the bolt pattern of a ford Tourneo Connect?
The ford Tourneo Connect has a 5x108 bolt pattern with a 63.4 mm center bore. Bolt pattern is consistent across the model generation — confirm against your existing wheel before fitting aftermarket wheels or adapters.
What size lug nuts does the ford Tourneo Connect use?
The ford Tourneo Connect uses M12x1.5 wheel studs / lug thread. Match this thread size and pitch exactly when replacing lug nuts — an incorrect pitch will cross-thread and fail to torque properly.
What is the center bore of a ford Tourneo Connect?
The ford Tourneo Connect has a 63.4 mm center bore. Aftermarket wheels with a larger bore need hub-centric rings to sit true; a smaller bore will not fit over the hub.
Last verified 2026-07-07. Bolt-pattern data is generation-level community reference — confirm against your vehicle's wheel before purchase.