ford F1/2 TON F-100,150 TRUCK 2WD, 4WD bolt pattern & wheel specs
The ford F1/2 TON F-100,150 TRUCK 2WD, 4WD (1954–1996) has a 5x139.7 bolt pattern, 1/2-RH lug thread, and 87.0 mm center bore.
ford F1/2 TON F-100,150 TRUCK 2WD, 4WD wheel bolt pattern & specs
| Bolt pattern (PCD) | 5x139.7 |
|---|---|
| Wheel thread / lug size | 1/2-RH |
| Center bore | 87.0 mm |
| Generation years | 1954–1996 |
| Source | adaptitusa-reference |
What else uses this bolt pattern?
The ford F1/2 TON F-100,150 TRUCK 2WD, 4WD's 5x139.7 bolt pattern is shared by other vehicles — wheels and adapters made for one may physically bolt to another (center bore and load rating permitting). See the full list on the 5x139.7 bolt pattern page.
Frequently asked questions
What is the bolt pattern of a ford F1/2 TON F-100,150 TRUCK 2WD, 4WD?
The ford F1/2 TON F-100,150 TRUCK 2WD, 4WD has a 5x139.7 bolt pattern with a 87.0 mm center bore. Bolt pattern is consistent across the model generation — confirm against your existing wheel before fitting aftermarket wheels or adapters.
What size lug nuts does the ford F1/2 TON F-100,150 TRUCK 2WD, 4WD use?
The ford F1/2 TON F-100,150 TRUCK 2WD, 4WD uses 1/2-RH wheel studs / lug thread. Match this thread size and pitch exactly when replacing lug nuts — an incorrect pitch will cross-thread and fail to torque properly.
What is the center bore of a ford F1/2 TON F-100,150 TRUCK 2WD, 4WD?
The ford F1/2 TON F-100,150 TRUCK 2WD, 4WD has a 87.0 mm center bore. Aftermarket wheels with a larger bore need hub-centric rings to sit true; a smaller bore will not fit over the hub.
Last verified 2026-07-07. Bolt-pattern data is generation-level community reference — confirm against your vehicle's wheel before purchase.