ford Crown Victoria (Gen 2, refresh) bolt pattern & wheel specs
The ford Crown Victoria (Gen 2, refresh) (2003–2011) has a 5x114.3 bolt pattern, and 70.5 mm center bore.
ford Crown Victoria (Gen 2, refresh) wheel bolt pattern & specs
| Bolt pattern (PCD) | 5x114.3 |
|---|---|
| Center bore | 70.5 mm |
| Generation years | 2003–2011 |
| Source | bolt-pattern.com |
What else uses this bolt pattern?
The ford Crown Victoria (Gen 2, refresh)'s 5x114.3 bolt pattern is shared by other vehicles — wheels and adapters made for one may physically bolt to another (center bore and load rating permitting). See the full list on the 5x114.3 bolt pattern page.
Frequently asked questions
What is the bolt pattern of a ford Crown Victoria (Gen 2, refresh)?
The ford Crown Victoria (Gen 2, refresh) has a 5x114.3 bolt pattern with a 70.5 mm center bore. Bolt pattern is consistent across the model generation — confirm against your existing wheel before fitting aftermarket wheels or adapters.
What is the center bore of a ford Crown Victoria (Gen 2, refresh)?
The ford Crown Victoria (Gen 2, refresh) has a 70.5 mm center bore. Aftermarket wheels with a larger bore need hub-centric rings to sit true; a smaller bore will not fit over the hub.
Last verified 2026-07-07. Bolt-pattern data is generation-level community reference — confirm against your vehicle's wheel before purchase.